First, the Shandong ventilation pipe processing can be opened grille detailed description of the tuyere

　　1、葉片可垂直長邊或平行長邊，訂貨時必須注明，無注明時，一律按葉片平長邊進行生產。

　　1, the blade can be vertical long side or parallel long edge, order must be noted, when no indication, all according to the blade flat long edge production.

　　2、該風口是GS型固定格柵風口的派生產品，在GS型的基礎上增加一個可開的內框，使葉片部分為一活動門結構，撥動活動門的門閂即可將活動門打開，便于安裝和維修。

　　2, the air is the derivative product of GS type fixed air grille, increased with an open frame on the basis of GS type, the blade part is a movable door structure, a movable door latch can be movable door open, easy installation and maintenance.

　　3、風口邊框有寬窄之分，示意圖中括號內尺寸為寬邊框的尺寸，用戶訂貨時必須注明，無注明時，一律按窄邊框生產。

　　3. The width of the air outlet is divided into the width and the width of the brackets in the drawing. The size of the width of the bracket should be indicated when the user orders.

　　二、鋁合金風口安置前需注意的地方

　　Two, aluminum alloy tuyere before installation should pay attention to

　　安置前，應對鋁合金風口各部件舉行查抄。機件是否完備，葉輪與機殼的旋轉偏向是否劃一，各部聯接是否精密，葉輪、主軸、軸承等緊張機件有無損傷，傳動組是否機動等等。

　　Before installing, answer all parts of aluminium alloy tuyere to be checked completely. Whether the mechanical parts are complete, whether the rotation of the impeller and the shell is uniform, whether the parts are connected accurately, whether the impeller, the main shaft, the bearing and other tight parts are damaged, whether the drive group is flexible and so on.

　　如發明問題，應立刻予以修好和調解。過細主軸三角帶輪和點擊三角帶輪想對應的槽位不行以墮落，套好膠布之后安置寧靜防護罩，包管寧靜。

　　If problems are invented, they should be repaired and settled immediately. Not too small slot spindle triangular belt wheel and click on the triangle belt wheel corresponding to a tape placement after the fall, the quiet guard, ensure peace.

　　別的我們還必要在安置鋁合金風口的調治門的時間，肯定要過細不要裝錯，從而包管進氣的時間與葉輪旋轉偏向是一樣的。

　　We also need to place other Aluminum Alloy air regulating gate time must be careful not to install the wrong time, and the rotation of the impeller inlet to ensure that bias is the same.

　　做好上面事變以后我們還應該過細：安置鋁合金風口完畢之后，測試傳動組是否正常，確定不會出現過緊和牢固部門出現碰撞等問題，發明問題及時調解到佳狀態即可。

　　Do the above after the incident, we should also carefully: after placement of Aluminum Alloy tuyere is completed, test drive is normal, does not appear to determine the collision problem of tight and strong departments, identify problems and timely mediation to the best you can.

　　本文的精彩內容來自山東通風管道加工詳細內容請點擊我們的網站:http://m.lcyucheng.com/謝謝您的到來!

　　The highlights of this article are from the Shandong ventilation pipe processing details, please click on our official website: http://m.lcyucheng.com/, thank you for coming!

上一篇：開放式通風管道加工頻率的計算
下一篇：風閥瓣密封面無滲漏的驗收標準